Welcome to Juyiheng Iron and steel
Tel : +8615964533262 E-mail : freya@fhuametal.com
-
PRODUCT CENTERThe company's products mainly include aluminum pipes, stainless steel pipes, carbon steel pipes, galvanized pipes and copper pipes and other pipe profiles. The products currently have Exported to more than 100 countries
-
NEWS CENTERThe company implements the new development concept, adhering to the cultural values of "loyalty, diligence, change, excellence, and excellence", promotes high-quality development and transcendence in an all-round way
Structural Steel Pipe
Application:Used in the general structure and the mechanism Industry
Size:OD: 10.3-762mm,WT: 6-35mm,LENGTH: 5.8/6/11.8/12m
Pipe Standard:ASTM A53,ASTM A519,ASTM A500 ASTM A252,JIS G3441/G3445,EN 10210/10297
hiddenValue
PRODUCT DETAILS
Description
Application: In Structural Engineering and Construction Industry
Specification: OD: 1/8'' ~ 26'' (10.3 ~ 660mm)
WT: SCH 10 ~ 160, SCH STD, SCH XS, SCH XXS
LENGTH: Fixed Length (5.8/6/11.8/12mtr), SRL, DRL
Standard: ASTM A53/A252/A500/A501, JIS G3444, EN 10210/10219
Ends: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends
Surface: Bare, Lightly Oiled, Black/Red/Yellow Painting, Zinc/Anti-corrosive Coating
Packing: Bundled/In Bulk, Plastic Caps Plugged, Waterproof Paper Wrapped
|
Grade |
C, max |
Mn, max |
P, max |
S, max |
|
|
A53 |
A |
0.25 |
0.95 |
0.05 |
0.05 |
|
B |
0.3 |
1.2 |
0.05 |
0.05 |
|
|
A519 |
1026 |
0.28 |
0.9 |
0.04 |
0.05 |
|
A252 |
S235JRH |
0.17 |
1.4 |
0.04 |
0.04 |
|
S275JOH |
0.2 |
1.5 |
0.035 |
0.035 |
|
|
S275J2H |
0.2 |
1.5 |
0.03 |
0.03 |
|
|
S355JOH |
0.22 |
1.6 |
0.035 |
0.035 |
|
|
S355J2H |
0.22 |
1.6 |
0.03 |
0.03 |
|
|
S355K2H |
0.22 |
1.6 |
0.03 |
0.03 |
|
|
A500 |
A |
0.26 |
1.35 |
0.035 |
0.035 |
|
B |
0.30 |
1.40 |
0.045 |
0.045 |
|
|
C |
0.23 |
1.35 |
0.035 |
0.035 |
|
|
D |
0.27 |
1.40 |
0.045 |
0.045 |
|
Structural Steel Pipe End
|
Plain End |
Wall Thickness less than 0.5 inch, including SCH STD & SCH XS |
|
Plain End (Square Cut) |
Wall Thickness over 0.5 inch, including SCH XXS |
|
Beveled End |
Wall Thickness less than 0.5 inch, including SCH STD & SCH XS |
|
Couplings |
Outside Diameter equal or less than 2'' |
|
Thread Protection |
Outside Diameter over 4 inch |
Specification&Standard
|
Standard |
Grade |
Chemical Composition (%) |
Mechanical Properties |
||||||
|
ASTM A53 |
C |
Si |
Mn |
P |
S |
Tensile STrength(Mpa) |
Yield STrength(Mpa) |
|
|
|
A |
≤0.25 |
- |
≤0.95 |
≤0.05 |
≤0.06 |
≥330 |
≥205 |
|
|
|
B |
≤0.30 |
- |
≤1.2 |
≤0.05 |
≤0.06 |
≥415 |
≥240 |
|
|
|
ASTM A106 |
A |
≤0.30 |
≥0.10 |
0.29-1.06 |
≤0.035 |
≤0.035 |
≥415 |
≥240 |
|
|
B |
≤0.35 |
≥0.10 |
0.29-1.06 |
≤0.035 |
≤0.035 |
≥485 |
≥275 |
|
|
|
ASTM A179 |
A179 |
0.06-0.18 |
- |
0.27-0.63 |
≤0.035 |
≤0.035 |
≥325 |
≥180 |
|
|
ASTM A192 |
A192 |
0.06-0.18 |
≤0.25 |
0.27-0.63 |
≤0.035 |
≤0.035 |
≥325 |
≥180 |
|
|
API 5L PSL1 |
A |
0.22 |
- |
0.90 |
0.030 |
0.030 |
≥331 |
≥207 |
|
|
B |
0.28 |
- |
1.20 |
0.030 |
0.030 |
≥414 |
≥241 |
|
|
|
X42 |
0.28 |
- |
1.30 |
0.030 |
0.030 |
≥414 |
≥290 |
|
|
|
X46 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥434 |
≥317 |
|
|
|
X52 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥455 |
≥359 |
|
|
|
X56 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥490 |
≥386 |
|
|
|
X60 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥517 |
≥448 |
|
|
|
X65 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥531 |
≥448 |
|
|
|
X70 |
0.28 |
- |
1.40 |
0.030 |
0.030 |
≥565 |
≥483 |
|
|
|
API 5L PSL2 |
B |
0.24 |
- |
1.20 |
0.025 |
0.015 |
≥414 |
≥241 |
|
|
X42 |
0.24 |
- |
1.30 |
0.025 |
0.015 |
≥414 |
≥290 |
|
|
|
X46 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥434 |
≥317 |
|
|
|
X52 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥455 |
≥359 |
|
|
|
X56 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥490 |
≥386 |
|
|
|
X60 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥517 |
≥414 |
|
|
|
X65 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥531 |
≥448 |
|
|
|
X70 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥565 |
≥483 |
|
|
|
X80 |
0.24 |
- |
1.40 |
0.025 |
0.015 |
≥621 |
≥552 |
|
|
|
Standard |
Grade |
Chemical Composition |
Mechanical Properties |
|||||||||
|
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Cu |
Tensile Strength(Mpa) |
Yield Strength(Mpa) |
Elongation(%) |
||
|
GB/T8163 |
10 |
0.07-0.14 |
0.17-0.37 |
0.35-0.65 |
≤0.035 |
≤0.035 |
≤0.15 |
≤0.25 |
≤0.25 |
335-457 |
≥205 |
≥24 |
|
20 |
0.17-0.24 |
0.17-0.37 |
0.35-0.65 |
≤0.035 |
≤0.035 |
≤0.25 |
≤0.25 |
≤0.25 |
410-550 |
≥245 |
≥20 |
|
|
Q345 |
0.12-0.20 |
0.20-0.55 |
1.20-1.60 |
≤0.045 |
≤0.045 |
- |
- |
- |
490-665 |
≥325 |
≥21 |
|
Packing
Bundled package
On bundle of steel tube shall be the same in batch number, steel grade and specification.the rest of tubing less than one bundle should be tied into small bundles.
The weight of each bundle should be less than 50kg.The max weight cannot exceed 80kg of the bundle If there are special requirements.
When the length of the steel tube is greater than or equal to 6m, with at least 8 strapping bands for each bundle, divided into 3 groups and 3-2-3.
When the length of the steel tube is less than 6m, and each bundle is tied at least 5 knots and divided into 3 groups, which are 2-1-2.
When the length of the tube is greater than or equal to 3m, and each bundle is tied with at least 3 bands, divided into 3 groups, 1-1-1 showed below
Wooden box package
The wooden box is suitable for cold rolling or cold drawing seamless steel tube, polished hot rolled stainless steel tube.
When the outer diameter of steel pipe is greater than or equal 10mm, the maximum weight of the container should be 50kg.
When the outer diameter of steel pipe is less than or equal 10mm, the maximum weight of the container should be 30kg.
Storage video
Warehouse storage
The group company and factory cover an area of more than 800 mu, with more than 1,500 employees, and its business covers more than 20 countries and regions around the world. Xinghan Group is committed to developing new types of steel products and building a first-class coated sheet and steel manufacturing enterprise with international competitiveness. Xinghan Group hopes to grow into a widely respected and sustainable global resource-based enterprise through continuous pursuit of excellence, create better social, economic and environmental benefits, and bring more competitive value returns to employees and customers.
Packing and delivery
The company has major production lines such as pickling, cold rolling, hot dip galvanizing, hot dip galvanizing, thick plate galvanizing and color coating, forming an annual production capacity of 1 million tons of pickling coil, 1 million tons of cold rolled sheet and 900,000 tons of hot dip galvanized sheet. Galvanized and hot-dip galvanized aluminum zinc silicon steel sheet scale 450,000 tons thick galvanized steel plate scale 300,000 tons color coated steel plate scale is one of the largest steel and non-ferrous metal smelting and processing suppliers in Shandong Province.
Customer visit
The company adheres to the development strategy of "seeking development by science and technology, seeking efficiency by management", adheres to the core values of "people-oriented, integrity, responsibility and excellence", adheres to the development system of "green products and green industry", "promotes high-quality beyond development in an all-round way", and realizes the vision of "building a first-class aluminum processing service enterprise with international competitiveness".
Application field
The main supply fields are: aerospace, national defense equipment, military weapons, chemical industry, shipbuilding, nuclear energy, trains, containers, environmental protection, precision machining, auto parts, machinery, electronic products, molds, medical treatment Equipment, construction, decoration, etc.
RELATED PRODUCTS
GET A FREE QUOTE
Tel : +8615964533262
Email : freya@fhuametal.com
WhatsApp：+8615964533262
Address : Room 1007, Building 2, Zhongjian Jinxiu Square, Huaiyin District, Jinan, Shandong
